Specializing in BIM Modeling Services
SOLUTIONS FOR MEP ENGINEERS, MEP CONTRACTORS AND PRODUCT MANUFACTURERS
Specializing in providing Full-Service BIM modeling, coordination, clash resolution, shop drawings, fabrication drawings, spool drawings, and as-builts services for Construction projects and Building Product Family Related Models.
Supporting Architectural, Structural, MEP Engineers, General Contractors, Mechanical, Electrical, Plumbing (MEP), Fire Protection Trade disciplines and any type of Manufacturers needing BIM Family Content Creation modeling services. Ranging from design modeling used to develop Construction Documents to then be used for coordination and clash-clearing against other trades with the objective in developing approved shop drawings for construction that can be also be developed into fabrication and spool drawings through to full-service as-builts for facility management use as a full life cycle documentation system.
With Revit, we can model, document and visualize building & construction-related projects of any size or complexity. With proven Revit technology, we confidently take on any construction project. No matter what design information you are working with or what type of deliverable is required, we can rely on Revit’s flexibility and power to get the job done as expected and on schedule.
DISCIPLINES SERVED
AECO, Architectural, Engineers, Contractors, Owners, Structural, MEP Design Firms, General Contractors, Mechanical, HVAC, Ducting, Ventilation, Electrical, Communications/Security, Plumbing, Refrigeration, Piping, Equipment Manufacturing, Fabrication, etc.
SOFTWARE SOLUTIONS
AutoCAD MEP, AutoCAD P&ID, AutoCAD Plant 3D, AutoCAD Revit MEP, AutoCAD Structural Detailing, Autodesk 3ds Max, Autodesk Architecture, Autodesk AutoCAD, Autodesk BIM 360, Autodesk Electrical, Autodesk Inventor, Autodesk Mechanical, Autodesk NavisWorks, Autodesk Quantity Takeoff, Autodesk Revit, Autodesk Revit Architecture, Autodesk Revit Fabrication, Autodesk Revit MEP, Autodesk Revit Structure, Bentley’s AECOsim Building Designer, Bentley’s MicroStation, Bentley’s Navigator, BIM 360 Glue, CATIA, Fabrication CADmep, Hydratec’s HydraCAD, Inventor, Navisworks Manage, Pro/ENGINEER, PTC Creo, Rendering (Autodesk Rendering), Revit, SolidWorks, Tekla Structure, Trimble SysQue, etc.
PHASES SUPPORTED
Additions, Alterations, Interiors, New Projects, Pre-design, Design, Planning Schematics, Design Development, Construction Documents, Pre-qualification, Bidding/Negotiating, Bidding, GC Bidding-invitation, Sub Bidding, Construction, Subcontract Award and Operation, Facility Management, Operational & Manual, As-built, etc.
PROJECT TYPES
Academy, Airports, Apartment and Condominiums, Commercial, Communications Buildings, Data Centers, Dormitories, Educational, Elderly and Assisted Living, Entertainment, Federal Facilities, Governmental, Healthcare, Hospitality, Hotels & Motels, Industrial, Institutional, Laboratories, Local Government, Manufacturing, Medical, Military, Mixed-Use and Retail, Municipalities, Naval Facilities Engineering Command, Office and Headquarters, Private, Public Services, Recreation, Religious/Funeral, Schools, Site Development, Stadiums, State, Transportation, U.S. Army Corps of Engineers, U.S. General Services Administration, U.S. Veterans Administration, Utilities, etc.
WHY BIM? THE REALIZATION FOR 3D MODELING COORDINATION
The construction industry’s acknowledgment that substantial savings were found is what sparked the switch from a 2D CAD process to 3D BIM (Building Information Modeling). For instance, Navisworks far exceeds CAD’s traditional overlay approach. Using BIM to virtually model trades and, in addition, performing multi-trade coordination for clash identification is more efficient.
Old-school 2D processes have usefulness in the industry. However, they are incapable of thoroughly identifying all complex, overlapping routing clashes. As a result, trade installers find them later, on the job site, after their discipline is already installed. The result is expensive delays, reworks, tear-outs and inefficient rerouting. These issues are 100% avoidable when seen in advance using BIM.
IN STEPS BIM
Virtual coordination, through BIM, eliminates any of these problems before the construction process even begins. This is specifically true because collaboration via Navisworks finds conflicts otherwise missed in the 2D clash-detection process.
Due to this, a project will go into production without any costly complications in the form of unanticipated conflicts and time-delaying, makeshift modifications. Furthermore, time-saving, spooled details allow for the prefabrication of parts produced off-site and ready to go in place as needed. The results are therefore more efficient and also more cost-effective.
THE FUTURE IS NOW
BIM has arrived and is gaining momentum as the industry standard as a growing percentage of the industry embraces its benefits daily. Without a doubt, the overall trade installation experience has become virtually simplified, needing less site-time and investigation than previously required.
In summary, on-the-spot, unplanned adjustments are a thing of the past because conflicts can now be studied and rerouted ahead of time virtually, using BIM. Creating an entirely clash-cleared model long before the construction process begins is now a reality.
These are just a few of the many benefits of implementing BIM today.
WHY CHOOSE US
You may count on us for your next project because of our experience and genuine concern for customer satisfaction. We offer competent cost estimating and quantity takeoff services with a strong emphasis on customer satisfaction.
- Financial Responsibility to Our Clients
- Superior Quality and Craftsmanship
- Quality and Value to the Projects We Deliver
- Highest Standards in Cost Control
- On Time and on Budget
- Real Focus on Customer Satisfaction
POPULAR QUESTIONS
It’s difficult to win every bid in this competitive and crazy market, and no one can guarantee that they will win a specific project, but bidding more correct bids increases the chances of getting more business, and that’s where our estimating company comes in and takes the lead with very cost-effective plans.
We don’t have a “one size fits all” policy because every project is unique, so we take the time to understand the nature of the project and provide a professional proposal for services before beginning any project, keeping in mind the scope of work and the complexity of drawings. Once the client approves the proposal, we begin the project.
We charge per projects not per hour and it varies along the project to project and we cut down your overhead cost in terms of hiring a pricey & slow in-house estimator.
We generally serve Prime contractors, Sub Contractors, Home Builders, Property Owners, lenders, and Architects.
Our Engineers typically complete a project in two to five days but if a larger & complex job comes in so we always check back with our client if there is a rush on the project. If so, then we accommodate them by putting a dedicated team of Engineers onto it with a little more fee to shield the overtime. We always try to submit an estimate a day or two before the bid date.
Yes, we provide rough cost estimates based on the structure type, levels, line plans, and a general sense of what you want to construct. This rough cost estimate aids you in determining the funds needed to make critical design and development decisions.
We are a blueprint estimation firm, therefore most of our projects are based on drawings and specifications, but we are capable of providing assumption-based estimates, which are typically for bath and kitchen remodelling and addition estimates, thanks to our years of experience.
We charge in two terms an upfront requisition of fifty percent at starting and a final requisition of fifty percent before delivering the project. We accept all Visa, Master, Amex, PayPal, and wire transfers.